   |
POTABLE WATER PUMP By ATTWOOD CORP
This economical, compact pump delivers drinking water
from a water tank to the 6142 three-way faucet/hand pump. Seal allows
it to run dry without damage. Made from high-impact plastic. Patented
IPMO listed. Inlet and outlet have combination fittings: 3/4" barbs can
be removed to accommodate 1/4" NPT fitting. Potable Water Pump is not
activated by line pressure. Pump is non-submersible. Note: Mount
centrifugal pump so water will flow into the pump. Caution: Not external
ignition protected. |
|
|
 |
SHOWER SUMP SYSTEM By ATTWOOD CORP
Pumps out the shower, sink, or tub drain with a V750
bilge pump actuated by a float switch. The pump automatically starts at
2" water level and removes accumulated water. Provides three inlet sizes
for hooking up multiple drains and an inlet for 3/4" I.D. hose. A check
valve in the outlet connector prevents pump cycling and reduces
standing water odor. Clear plastic lid for filter inspection and
service. Updated design now has four mounting clamps included for easy
installation and service. Self-priming pump for cleaning boats, general
use, or use as a shower pump. |
|
|
 |
WATERBUSTER CORDLESS PUMP By ATTWOOD CORP
This patented, submersible pump is a great way to
remove unwanted water from boats, pool covers, aquariums and sump pits.
Convenient and safe, too, because it needs no electrical cord – runs up
to 5 hours on three alkaline "D" batteries. 6-3/8"H x 5-1/4" Diameter.
•Pumps up to 200 gallons per hour •Includes 42" hose with garden hose
adapter for adding longer hose •Lifts water to height of 4 feet. |
|
|
  |
MINIATURE LOW PRESSURE WATER PUMP By ZEBRA RV ACCESSORIES
This compact low pressure pump is designed to supply
water to a single fixture faucet which is controlled by remote switch
operation. It features high heat resistance and high modulus
ABS/Polycarbonate alloy construction to insure damage from water, shock,
or vibration and to provide long-term and dependable operation. Since
the pump employs single direction pumping action, accessory check valves
or filters are eliminated. 12VDC at 2-1/4 amps. Motor fuse–3 amps.
Water connection–3/8" MPT and 3/8" barb combination inlet, 3/8" barb
outlet. 1-1/4 gallons per minute, at 5 PSI. |
|
|
  |
36950-2000 PAR PRESSURE MAGIC By THE RULE GROUP
The quietest positive displacement water system pump
with the lowest current draw in the RV industry. Supplies a steady
stream of water for multiple fixture systems. Extremely quiet operation.
Pump operates with unusually low voltage from partially discharged
battery or overloaded power converter. Very low current draw, motor runs
cool. Pulsation dampeners help protect pump from breakage due to
freezing. Built-in port check valve. Diaphragm design allows pump to run
dry without damage. IAMPO approved type 4. 12 volts DC, 3.0 GMP, 30
PSI. Running current 3.6 amps. Maximum current 4.8 amps. Barbed slip on
ports for 1/2" or 5/8" ID hose. Weight 8 lbs. 8"H x 5-1/2"W x 6-5/8"D. |
|
|
|
|
 |
PAR ELECTRIC GALLEY PUMP & FAUCET By THE RULE GROUP
The economical answer to running water at the turn of
a switch. Quiet operation electric pump is compact, easy to install,
draws only 1.6 amps at 12 volts and pumps 1 GPM at 5 PSI. The attractive
faucet has a stainless steel swing spout, easy-to-clean white plastic
base and built-in switch to operate the pump. Switch rating up to 5 amps
at 12 volts. Available as individual components or pump and faucet
combination package. Pump and faucet has 3/8" hose connection. Pump is
not self-priming and must be mounted below water level at tank. Pump
measures 2" high, 2-3/4" wide, 4-3/4" long. Faucet is 2-1/2" high, 4"
wide and 1-3/4" long. |
|
|
 |
PAR-MAX 2 AUTOMATIC WATER PRESSURE PUMP By THE RULE GROUP
Successor to Par-Mate. Compact size, easy
installation! Ideal replacement for worn out 2-2.5 GPM fresh water
pumps. Fits in same space as Par-Mate.•2.5 GPM•Super Quite•Self
priming•Long life pressure switch•Includes both 1/2" barbed and threded
Qest fittings for easy installation. |
|
|
 |
PAR-MAX™ 3 By THE RULE GROUP
The PAR-MAX 3 provides up to 3 outlets with 3.4
GPM/12.8 LPM. This series offers the same easy installation as the
PAR-MAX 4 with snap-in ports for hose or QEST type plumbing. Other
features include vibration and shock reducing bumpers, run-dry ability
and battery conserving low amperage draw motor. Snap-in ports included
with pump 1/2" hose barb and 1/2" threaded (QEST type). 12 VDC, 4.4 amp
draw @ 10 p.s.i. Pressure cut-in: 20 p.s.i., cut-out: 40 p.s.i. |
|
|
 |
PAR-MAX™ 3.0 GPM WASHDOWN PUMP KIT By THE RULE GROUP
Compact high pressure deckwash pump. •Powerful 3.5
gpm (13.2 lpm) flow rate. •Supplied complete with Pumpgard and trigger
nozzle. •Snap-in-ports. •Self priming up to 10ft (3m). •High pressure
jet blasts mud and silt from anchor chain and decks. •Waterproof with
coated motor and sealed pressure switch for mounting in exposed
positions. •Super quiet, diaphragm design allows dry running. •Thermal
overload protection automatically stops the motor if it overheats due to
overloading, with auto re-start feature. •Complies with USCG 183.410
and ISO 8846 MARINE (Ignition Protection). •Shut-off pressure 50 psi
(3.5 bar). |
|
|
 |
PAR-MAX™ 4 By THE RULE GROUP
Compact, low profile design, Four Chamber Diaphragm
Water System Pump. Provides 3.8 GPM/14.4 LPM of smooth quiet flow for up
to 4 outlets and an energy saving low amperage draw. PAR-MAX Series –
the choice of serious boaters. Snap-in Ports included with pump, 1/2"
hose barb and 1/2" threaded (QEST type). 12 VDC, 5.5 amp draw @ 10
p.s.i. pressure cut-in: 20 p.s.i., cutout: 40 p.s.i. |
|
|
 |
PAR-MAX™ 4.0 GPM WASHDOWN PUMP KIT By THE RULE GROUP
•Powerful 4.0 gpm (15 lpm) flow rate •Shut-off
pressure 60 psi (4.3 Bar) •Suitable for high pressure applications •Self
priming up to 10ft (3m) •Fitting: Connections for 3/4" (19mm) ID hose
•Size: 7.8" long x 4.0" wide x 4.0" high (20cm x 10cm x 10cm) •Weight: 5
lb (2.1 kg) |
|
|
|
|
 |
SENSOR-MAX VSD WATER PRESSURE SYSTEM PUMP By THE RULE GROUP
These pressure sensor controlled, multi-outlet water
pressure pumps, with variable speed drive, serve 1-5 outlets. Motor
speed is electronically controlled to maintain steady flow and constant
pressure. Amp draw reduces as flow reduces to conserve energy, ranging
from less than 1 amp to a maximum pr 10 amps. Connections for 1/2"
(13mm) ID hose or 1/2" Qest threads. •Variable Speed Control •Unique
constant water pressure - NO pressure switch. •Solid State Pressure
Sensor •Electronically controlled variable flow. •Controls Pressure by
Changing Motor Speed •Gives constant flow and hot water mix. •Thermal
overload protection automatically stops motor should it overheat due to
overload, with auto re-start feature. •Speeds Up As Demand Increases
•Eliminates accumulator tank. •True sensors regulated water pressure.
•Nearly Silent Operation / No Cycling •Up to 4.5 gpm (17 lpm) output.
•Self-priming up to 10ft (3m) / Runs Dry •Runs silently under normal
use. •Automatically adjusts to 12 Volt or 24 Volt dc power input.
•Conserves battery power - uses lower amps at lower flow |
|
|
 |
WATER PRESSURE REGULATOR By THE RULE GROUP
•Reduces unregulated city water pressure that can run
as high as 100 psi down to a safe 35 psi - automatically •Features
built-in backflow preventer •Built-in port strainer is easily cleanable
•Solid brass hose connection |
|
|
  |
1.1 GPM WATER PRESSURE PUMP By JOHNSON PUMP OF AMER
•Industrial, RV, Marine Agricultural pump •Open Flow:
1 GPM [3,8 LPM] •12V, 35 PSI [Cutoff] •Amps: 2.5 •Duty Cycle:
Intermittent •ISO 8846 •Smooth operation •Self Priming •Silent Running
•Low Power Draw •Runs dry without damage •Easy connecting System 3/8"
Barb |
|
|
 |
AQUA JET WASH DOWN PUMP KIT 5.2 By JOHNSON PUMP OF AMER
New 19 l/min (5.2 GPM) wash down kit conveniently
includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector
inlet strainer, spray nozzle, bulk head fitting with valve, 7.5 meters
(25') of coiled wash down hose and an illuminated panel switch all in
one package. Aqua Jet wash down pump kit makes it easy to add a wash
down pump to any boat. •CE-approved •Whisper quiet operation
•Five-chamber construction •Smooth flowing •Self-priming •Easy, low cost
maintenance •Quick-connect hose •Integrated pressure switch •Long
service life •Pump body: Nylon •Valve housing: Polypropylene •Valves:
Nitrile •Connection: 3/8" BSP or 1/2" hose (ø 13 mm) |
|
|
  |
499 WATER INLET FITTING By PERKO
Chrome plated bronze. Standard female swivel hose
connector. Complete with black plastic watertight plug and stainless
steel bead chain. Use for obtaining water under pressure at dockside.
1/2" pipe size, 2-3/4" O.D. flange. Uses #8 screws. One per display
card. |
|
|
|
|
  |
ELECTRIC FAUCET COMBO By SHURFLO
•Suitable for hot or cold water operation •Adjustable
flow rate allows operation with pump or city water •Operating pressure
up to 87 PSI (6 bar) •Operating temperatures up to 176°F (80°C) •One
year limited warranty |
|
|
 |
EXTREME™ SERIES SMART SENSOR™ 5.7 WATER PUMP By SHURFLO
The Smart Sensor™ is a micro-processor control based
variable speed pump that silently delivers over 5 GPM and pressure up to
65 psi. SHURflo's Smart Sensor™ precisely monitors your system's water
pressure and adjusts the motor's speed, thus eliminating the need for a
pressure switch. Corrosion resistant coated seamless motor shell and
o-ring sealed end bells along with the protected electronic package make
the Smart Sensor™ capable of handling even the harshest marine
environments. Quick connect fittings included. Runs dry without damage.
Ignition protected. 12VDC. |
|
|
|
|
 |
MARINE FRESH WATER AUTOMATIC DEMAND PUMPS By SHURFLO
The integrated low RPM permanent magnet motor,
matched to the pump, gives maximum whisper quiet performance. Pumps come
with elbow and one straight 1/2" barbed fitting. •Self priming to 12',
can run dry •Whisper quiet performance •Ignition protected •Proven
triaphragm design •3 independent pumping chambers •Mounts in any
position •Built-in protection; check valve rated up to 200 psi •UL
Marine Approved |
|
|
 |
MARINE FRESH WATER AUTOMATIC DEMAND PUMPS By SHURFLO
The integrated low RPM permanent magnet motor,
matched to the pump, gives maximum whisper quiet performance. Pumps come
with elbow and one straight 1/2" barbed fitting. •Self priming to 12',
can run dry •Whisper quiet performance •Ignition protected •Proven
triaphragm design •3 independent pumping chambers •Mounts in any
position •Built-in protection; check valve rated up to 200 psi •UL
Marine Approved |
|
|
 |
PRESSURE REGULATOR – WALL MOUNT By SHURFLO
City water entry, pressure regulator, check valve.
One size fits all walls. Quick and easy installation. Easy straight
through construction. Leak tight construction. Diaphragm design assures
24 hour protection against the danger of city waterline high pressure. |
|
|
 |
PUMP SILENCING KIT By SHURFLO
•Greatly reduces unwanted pump noise •Softens water
hammering •Connects directly between pump and existing tubing •Includes
all necessary fittings |
|
|
 |
THE BLASTER MARINE TOUGH WASHDOWN PUMP By SHURFLO
Blast the grimiest decks clean easily. Perfect for
tough wash down applications such as fish box, scaling and anchor chain
cleaning areas. •3.2 GPM, 40 psi, 12VDC, 4.0 amps @ open flow •Powerful
continuous flow •Includes non-corrosive Blaster Nozzle •Able to run dry
without damage •Self primes to 12' •UL Marine Approved |
|
|
 |
WATER SYSTEMS ACCESSORIES By SHURFLO
Designed for safety and convenience, SHURflo
accessories are built to last. From a variety of innovative debris
strainers that protect your pump, to check valves and spray nozzles. Big
protection from small, yet essential products. |
|
|
 |
WATER SYSTEMS ACCESSORIES By SHURFLO
Designed for safety and convenience, SHURflo
accessories are built to last. From a variety of innovative debris
strainers that protect your pump, to check valves and spray nozzles. Big
protection from small, yet essential products. |
|
|
|
|
|
|
