HERITAGE MARINE  

Since 1986 

410 Mc Donough St. Joliet, IL. 60436 888.726.4406

WWW.SHOP. HERITAGE MARINE INC. COM 

FOR MORE THEN 50,000 ITEMS AND ENGINE PARTS.


ON LINE Boating Store


Good Old Time Service is still available at Heritage Marine. Just give us a call and we will take care of your SERVICE NEEDS.  

Our Goal is to GET YOU BACK ON THE WATER....
 

Our Mission is to exceed your expectations through excellence in our service and our products.

    CALL 
888-726-4406 

Main Navigation

Steering&Control Systems

STEERING AND CONTROLS
(Select from these Subcategories)
ENGINE CONTROLS
STEERING AND CONTROLS - ENGINE CONTROLS - CONTROL CABLES
(Select from these Groups)
Click pictures to see enlarged view!
CC633XX TF XTREME® PREMIUM CABLES By TELEFLEX INC
Ideal for long/difficult cable routings or where uncompromising low-friction performance is needed (such as a twin station boat with complex routings having multiple bends OR a ski boat where smooth, precise throttle response is needed). Heavy jacket and a profile-extruded core element deliver maximum smoothness with minimal lost motion. (4" minimum bend radius for 330 types.)
MARINER 630 TYPE CABLE By TELEFLEX INC
Mariner 630 type Cable (pre-1993 40 HP and Below); Pro Pedal Interlock for Mariner low horsepower engines (pre-1993); and Pro Pedal Interlock Cable when used with Mercury controls. Also fits Honda, Yamaha, Suzuki, Nissan, Tohatsu and some early models of Mariner when rigged with Mercury controls.
P/N CC170XX OMC 400 TYPE CABLE (ALL PRE-1979) By TELEFLEX INC
For all pre-1979 OMC, Gale, Johnson and Evinrude engines with OMC controls. •Drop-in replacement cable; uses existing connection components •Exceeds engine manufacturer's specifications •Sold per each
P/N CC179XX MERCURY/MERCRUISER 600A TYPE CABLE (1965-DATE) By TELEFLEX INC
For Mercury/MerCruiser and 1993-date Force (U.S. Marine) and Mariner engines with Mercury/Mariner controls. •Drop-in replacement cable; uses existing connection components •Sold per each
P/N CC205XX OMC 479 TYPE CABLE (ALL 1979-DATE) By TELEFLEX INC
For all 1979-date OMC, Johnson and Evinrude engines with OMC controls. •Drop-in replacement cable; uses existing connection components •Exceeds engine manufacturer's specifications •Sold per each.
STANDARD 3300 TYPE CONTROL CABLES P/N CC172XX By TELEFLEX INC
For all controls that accept a universal type cable with 10-32 threaded ends. •Standard duty universal replacement cable •Clamp type conduit fittings with 10-32 UNF threaded end fittings •Stainless steel solid core wire •Ideal for outboards, stern drives and many inboards •May require purchase of connection kit (See Connections Kits page) •Sold per each
TYPE 33C CABLE “RED JACKET“ By TELEFLEX INC
32377 industry standard shift and throttle cable, 3" travel.
MACH ZERO HIGH EFFICIENCY 33C STYLE CABLE By UFLEX USA
•Universal style (like C2, C8) •Suitable for outboard-inboard and stern drive engines •High efficiency for smooth operation •High flexibility for reduced bend radius. Ideal for long complex cable routings •Maintenance free •Stainless steel cable end fittings •High resistance blue outer jacket against abrasion, UV and chemicals
MACH36 MERCURY GENERATION II STYLE CONTROL CABLE By UFLEX USA
•Direct replacement for Mercury® Gen II™ cable Part No. 883719A •Suitable for outboard-inboard and stern drive engines •High efficiency for smooth operation •High flexibility for reduced bend radius. Ideal for long complex cable routings •Maintenance free •Stainless steel cable end fittings •High resistance blue outer jacket against abrasion, UV and chemicals
UFLEX C14 CABLE (OMC 479 STYLE) By UFLEX USA
•Stroke: 3" (75 mm) For Johnson, Evinrude, OMC engines manufactured after 1979.
UFLEX C2 CABLE (3300 STYLE) By UFLEX USA
•Stainless core wire with brass fittings •10-32 UNF threads •Stroke: 3.4" (87 mm) For use with inboard, stern drive and outboard engines with appropriate accessories.
UFLEX C5 CABLE (MERCURY 600A STYLE) By UFLEX USA
•Stroke: 3.75 (95 mm) for Mercury and Mercruiser engines and 1993 to date Force Mariner.
STEERING
STEERING AND CONTROLS - STEERING - MECH STEERING SYSTEM
(Select from these Groups)
Click pictures to see enlarged view!
G86 RACK STEERING SYSTEMS By UFLEX USA
•All stainless steel cable output ends •Made exclusively in corrosion resistant materials •Optional 90° or 20° installation •Standard 3/4"tapered shaft •Lock-to-lock steering wheel turns: 3,5 •Stroke: 8.2" (210 mm) •Maximum allowable steering wheel diameter: 16.5" (420 mm) •Minimum steering cable bend radius: 7,9" (200 mm) •G86 steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat •Available in package with RACKTECH and ACCUTECH
M86 UNIVERSAL RACK CABLE By UFLEX USA
"The One and Only Rack Cable that Replaces Morse® and Teleflex® Rack Cables!" Direct Replacement Cable for: Teleflex® "The Rack" SSC124 Morse® Command 200 PN/300620
4.2 NO-FEEDBACK (NFB®) STEERING SYSTEMS By TELEFLEX INC
The NFB 4.2 Rotary revolutionized steering with its patented No FeedBack technology and is the most popular NFB sold today–it's standard equipment on many new boats. It has the highest mechanical advantage of any cable steering system available, giving you some welcome additional muscle at the wheel. For replacement cables use SSC61 (QCII).
BIG-T STEERING SYSTEM HELM By TELEFLEX INC
The heavy-duty helm units incorporate rugged die-cast gears and added bearing support on the shaft. Uses SSC61 helical wound cables which provide greater flexibility for applications such as single or dual-station push-pull systems. Features compact rotary helm unit, standard 3/4" tapered shaft and stainless steel cable output ends. 3 turns lock-to-lock. Exceeds BIA certification requirements and A.B.Y.C. safety standards. For single or twin engine boats up to 34', wheels up to 20". Up to 235 HP. Use on cruisers, runabouts and houseboats. Uses SSC61/72XX cable.
COMMAND 200 RACK STEERING CABLE By TELEFLEX INC
C-200 Rack Cable. (Old Morse #300619 & 300620)
MERC GEN II TFXTREME® CABLE By TELEFLEX INC
Recommended for the ultimate in driver comfort, the best choice for long runs, twin stations or other difficult routings with multiple bends. •Splined coated core wire •Stainless steel fittings •4" min. bend radius •1 Construction
NFB PRO RACK TWIN CABLE SS152 By TELEFLEX INC
Twin Cable systems allow removal of lost motion from system and are recommended for boats with: 115 HP or larger outboards, top speeds higher than 50 MPH, or instability due to engine flutter.
QC II ADAPTER By TELEFLEX INC
Adapts QC Cable to old style threaded helm.
RACK AND PINION NO-FEEDBACK (NFB®) STEERING SYSTEMS SS151 By TELEFLEX INC
These new rack steering systems from Teleflex combine the precision feel of Rack & Pinion with the ease of 4 turns lock-to-lock. Patented No-FeedBack technology means steering loads are locked out until you turn the wheel, so you don't have to fight the wheel to keep the boat on course. Great for high performance single outboards! These systems bolt up to older Teleflex ® "The Rack" Rack & Pinion dashboard cutouts.
SAFE-T II (NFB®) STEERING SYSTEMS SS132 By TELEFLEX INC
Safe-T II is the next generation of the most popular marine steering system in history, featuring a compact rotary helm with lightning-fast 3-turn response. Available in single cable version, it's perfect for boats with top speeds under 50 MPH and where very quick steering response is needed. Bolts up to existing Teleflex Safe-T dash cutout.
SAFE-T QUICK CONNECT (QC) STEERING SYSTEM By TELEFLEX INC
The choice for safe, simple, reliable steering for boats up to 24' range. To enhance the simplicity of the design, we now offer the Quick Connect system, which does not require tools to connect the cable to the helm. We have also trapped the nut on the engine end. Twin cable systems recommended for boats that exceed 50 mph. Features compact rotary helm unit, 3 turns lock-to-lock travel, stainless steel cable output ends and standard 3/4" tapered shaft. Exceeds BIA certification standards. Exceeds A.B.Y.C. safety standards. For boats up to 24', steering wheels up to 16", with single engines. Use on O/B runabouts, bass boats, pontoon boats. Uses SSC61/62XX helical cable assembly.
SS134 BACK MOUNT RACK SINGLE CABLE ONLY By TELEFLEX INC
SS141 BACK MOUNT RACK STEERING SYSTEM PACKAGE By TELEFLEX INC
•Includes cable, helm, bezel and hardware •Fits Boats up to 24' – non power assisted outboard •Back mount design for easy installation •Replaces standard Teleflex Rack & Pinion without dash modification •Pre-assembled rack & cable •4 turns lock-to-lock •Standard 3/4" tapered steering shaft •Stainless steel telescopic ram •Meets N.M.M.A. certification requirements and A.B.Y.C. standards •Uses SSC134XX cable.
SSC124 RACK STEERING CABLE (OLD STYLE) By TELEFLEX INC
TELEFLEX QCII™ ROTARY CABLE By TELEFLEX INC
IT'S THE ONE REPLACEMENT CABLE YOU NEED TO SERVICE TELEFLEX ROTARY SYSTEMS. •Replaces most Teleflex rotary cables. •Fits old style (threaded) Safe-T®, Big-T®, Safe-T Quick Connect® and NFB® helms. •Installation is quick and easy. •No need to replace an entire system when only a cable is needed •Savings up to 25% •Includes QCII Adapter SA27620P
M86 UNIVERSAL RACK CABLE By UFLEX USA
"The One and Only Rack Cable that Replaces Morse® and Teleflex® Rack Cables!" Direct Replacement Cable for: Teleflex® "The Rack" SSC124 Morse® Command 200 PN/300620
RACKTECH™ RACK AND PINION STEERING SYSTEM By UFLEX USA
•M86 - preassembled helm with steering cable •G86 - shaft assembly •X 34 - 90° bezel
ROTECH-1 STEERING SYSTEM By UFLEX USA
Ultraflex T71FC rotary steering system packaged in a box. A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. Rotech kit contains T-71FC helm, X-34 90° Bezel & M66 steering cable. Packaged.
STEERING CABLE ADAPTER By UFLEX USA
K66 adapter Adapts M66 cable to threaded helms
T71 ROTARY STEERING SYSTEM COMPONENTS By UFLEX USA
Features and technical specifications: •New fast connect system •Corrosion resistant materials •Particularly suitable where clearance is limited •Optional 90° or 20° installation with or without friction kit•Lock-to-lock steering wheel turns: approx. 3.8 •Stroke: 9" (228mm) •Maximum allowable steering wheel diameter: 16" (406mm) •Minimum steering cable bend radius: 7.9" (200mm) •Minimal feedback •Compact for mounting •Exceeds EN 28848 safety standards •Exceeds ABYC P17 safety standards •T71FC steering system should not be used on boats equipped with engines that exceed the maximum horsepower rating of the boat •For boats faster than 50 mph the twin cable steering system T72FC is recommended
ULTRAFLEX M66 UNIVERSAL ROTARY STEERING CABLE By UFLEX USA
Ultraflex M66 steering cable directly replaces Morse 290 cable and Teleflex QCII cable. Will also replace TeleFlex SSC72 cable with purchase of K66 adapter.

STEERING AND CONTROLS - STEERING - STEERING ACCESSORIES
(Select from these Groups)
Click pictures to see enlarged view!
GLOVE BOX By ATTWOOD CORP
The black plastic box and door are lightweight yet sturdy and strong. Door incorporates a marine locking latch. Door Dim.: 13 1/4"L x 5 1/2"W. Installation hole size: 12" x 4 1/4".
SPORTLINE GLOVE BOX By ATTWOOD CORP
Made of rugged plastic, door incorporates a marine locking latch. Door Dim.: 13 3/4"L x 5 1/2"W. Installation hole size: 12" x 14 1/4". With teak accent.
TILLER LINE PULLEY By ATTWOOD CORP
Non-magnetic stainless steel body and strap with plastic sheave for wire rope tiller lines. The pulley strap is included. Meets ABYC Standard P-18. Swivel pulley rotates 360° on vertical axis. Open eye design for easy installation. Simply mount the strap and attach the pulley. Shrouded body design keeps tiller line in sheave track.
CENTURY GLOVE BOX By DETMAR CORP
Molded of high impact plastic. The textured black lid is hinged with stainless steel pins and contains a marine push-button lock with two keys. In open position lid serves as a beverage holder. •Door dimensions: 13-1/2" L x 5-1/2" H •Box dimensions: 11-7/8" L x 4-3/8" H x 6-3/4" D •Installation hole size: 12-1/8" L x 4-5/8" H
MOTORWELL BOOTS By DETMAR CORP
These rugged boots are made of durable vinyl that resists gasoline, oil, ultraviolet rays and extreme temperatures. Easily installed with pop rivets or screws.
TILLER ROPE GROMMET By DETMAR CORP
Prevents damage to control cables. Easily installed. Recessed holes allow grommets to be riveted or screwed in place. High density polyethylene won't rot or mildew. Fits 3" opening, 2 7/8" I.D.
E.Z. STEER AUXILIARY OUTBOARD MOTOR STEERING SYSTEM By MARINETECH PRODUCTS
STEER YOUR AUXILIARY OUTBOARD MOTOR FROM YOUR MAIN UNITS STEERING WHEEL Use with I/O or outboard whether transom mount or extended bracket. Main motor or auxiliary outboard may be raised together or independently. No holes to drill for installations. Easily installed or removed. All parts under limited warranty. All brackets are made of stainless steel covered with black vinyl to prevent scratching units. Quick connectors are brass with stainless balls and spring. Patented stainless steel connecting rods are available in standard lengths varying from 19" to 60". Rods may be special ordered for other lengths. The rod may be left on all the time while your boat is in the water, since it will go through most positions of both motors. Since the rod is so simple to connect or disconnect with the finger tip connectors, it is suggested that if the boat is being trailered or left unattended that the rod be removed to prevent theft.
AUXILIARY MOTOR STEERING KIT By MARINETECH PRODUCTS
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horsepower. Constructed of Zinc plated steel.
DRIVE BRACKET - STAINLESS By MARINETECH PRODUCTS
For those who would just like the rugged stainless steel drive bracket, Panther offers the 55-2750. Designed specifically for use with SeaStar Hydraulic Steering. Can also be used with 55-2400 and 55-2600 Steering Kits.
MODEL 100 PANTHER ELECTRO STEER By MARINETECH PRODUCTS
Trolling Made Easy...Steer your kicker from anywhere in the boat. The Panther 100 Electro Steer is easy to install anywhere in the transom area. It operates the motor with the push of a button. Powered from the cranking battery, maximum amp draw: 5-75 amps. And fast? The Electro Steer will move from full right to left in only four seconds, with fast, precision kicker control necessary for contour trolling. The connecting rod between the main and kicker motor easily disconnects, allowing versatile application.
MOTOR LINK ADAPTER KIT FOR HYDRAULIC STEERING By MARINETECH PRODUCTS
This kit is used specifically to adapt our steering kits to your main engine hydraulic steering. A cleverly designed L shaped bracket makes steering your kicker motor from your console an everyday event. The kit includes L bracket, washers, mounting bolt, Loctite and instructions. Works with Teleflex HC5345 cylinder.
PANTHER TROLLING MOTOR TIE BAR KIT By MARINETECH PRODUCTS
Connects an auxiliary trolling motor to U-Flex hydraulic steering. The tie bar is 1/2" thick and 36" long. All components are100% stainless steel. The 36" rod is fully threaded so it can be cut and bent for custom applications.
THROUGH TILT TUBE ELECTRO STEER By MARINETECH PRODUCTS
24' cable allows you to steer your kicker motor from anywhere in the boat. Mounts to your kicker motor in minutes. Does not take up any space on your transom. Wireless Option available. Freshwater use only.
TROLLING MOTOR TIE BAR KIT By MARINETECH PRODUCTS
This Tie Bar Kit is constructed entirely of stainless steel. Included in the kit are a 1/2" thick tie rod bar and a drive bracket to attach directly to your motor's SeaStar™ Hydraulic Steering. Simple to set up and very rugged, this kit will handle up to a 40hp kicker motor.
RIGGING GROMMETS By RIG RITE MFG
•Black rubber and plastic grommet. •Three different sizes for any rigging job. •Packaged on header cards.
GLOVE BOX LOCK/LATCH By SIERRA SUPPLY CO
AUXILIARY MOTOR LINK STEERING CONNECTOR KIT By THE COLEMAN COMPANY
Auxiliary motor steering has never been so easy! Goldeneye's new steering connector kit allows you to link your outboard kicker motor to your boat's main steering system so that you can maneuver your boat while trolling, right from the convenience of your boat's steering wheel. With its unique quick disconnect assemblies and clamp on mounting bracket, installation is quick and easy and does not require any unsightly attachments outside of the boat. Best of all, the unit allows you to independently tilt either motor up or down, which means that the connector rod can be left permanently attached. It works with all dual or single cable steering systems and can be used on popular hydraulic systems as well with the special adapter bracket that is available separately. The connector rod can be cut to length or bent to provide a perfect custom fit. Goldeneye's Auxiliary Motor Link is available in zinc plated steel for fresh water use and in stainless steel for use in salt water and for maximum strength.
CONNECTOR RODS By THE COLEMAN COMPANY
This connector rod is heavy duty 3/8" with long threaded ends for cut off to the exact length needed. Zinc plated steel.
QUICK DISCONNECT ASSEMBLY By THE COLEMAN COMPANY
Designed for trolling motor steering connectors. Features a spring action release. The ball stud is 3/8- 24 thread by 7/8"L. The body is tapped for 3/8 - 24 threaded rod. Sold per each. Zinc plated steel.
STEERING CABLE BOOT By T&R MARINE INC
Protects against cable freeze-up, rust and corrosion. Extends steering cable life. Keeps steering cable lubricated. Fits most domestic and foreign outboard and I/O steering cables. Comes packaged for peg board display.
STEERING TUBE CLEANING BRUSH By T&R MARINE INC
Clean corroded engine tilt tubes with T & R steering tube cleaning brush. Constructed of steel wire with 8" shaft. For use with electric drill motor. Comes packaged for peg board display. For all tilt tube engines.
DASHBOARD TILT MODULE KIT FOR MECHANICAL STEERING By TELEFLEX INC
For all types of engines including Outboard, Power-Assisted Stern Drive, non power-assisted Stern Drive and Inboard. Teleflex Tilt Steering brings comfort and convenience to any boat. Tilt steering allows adjustment of the wheel to suit nearly any physique and driving position. The Dashboard Module Kit includes a Tilt helm, Tilt mechanism, mounting hardware and instructions. •For all mechanical steering - rotary & rack •5 adjustment positions in 12° increments •Attractive rugged design •Standard 3/4" tapered steering shafts •Meets/exceeds applicable requirements
SAFE-T STEERING HELM AND BEZELS (TS) By TELEFLEX INC
For use on O/B and I/O boats. The internal helm gear mates with and drives a helical-wound steering cable assembly. Features compact helm, stainless steel output end and 15-to-1 helm ratio for quick response. 3-1/4 turns lock-to-lock. Maximum 16" dia. wheel. Meets BIA requirements for mechanical steering. Uses SSC61/72XX cable.
TRANSOM SUPPORT MOUNTING KIT/COMPONENTS By TELEFLEX INC
Universal kit for most outboard motor installations. Corrosion-resistant.
CABLE BOOT By T-H MARINE
This cable boot provides a fully open area to pass wiring and cables through and when rigging is completed simply pull cable tie snug around wires and cable to complete installation. Constructed of vinyl that resists ultraviolet rays, gas and oil.
STEER-STOP™ STEERING LOCK By T-H MARINE
•Locks Hydraulic Steering when Trailering •Clips onto Hydraulic Steering Rams •Keeps Engine Straight and Prevents Damage to Transom Savers
T-H FLEX By T-H MARINE
T-H Marine Supplies now offers T-H FLEX which is a lightweight jacketing for bundling and protecting wires, cables, and hoses. Braided from high temperature yarns, T-H FLEX offers total protection for wire and cable assemblies. The unique expansion characteristic makes T-H FLEX easy to slip on. Only a few sizes are needed to cover a large diameter range since each size of T-H FLEX expands up to four times its normal diameter.
TORQUE TABS By T-H MARINE
A simple solution to eliminate or reduce right hand steering torque caused by directional rotation of propeller. The Torque Tab is inexpensive, simple to install, and does not reduce speed. Cast aluminum construction complete with installation hardware and instructions. Skin Pack.
UTILITY GROMMET By T-H MARINE
This Utility Grommet is molded of tough, flexible, vinyl. It is designed for multiple uses in boats. This utility grommet can be used either horizontal or vertical. To install simply cut a 2 1/4" diameter hole and install with four (4) pan head screws (not furnished).
ZIPPERED RIGGING SLEEVE By T-H MARINE
Zips on and off to protect cables and hoses. Made from rugged weather and UV resistant Sunbrella®. Ends are secured with cable ties.
ENGINE CONNECTION KITS By UFLEX USA

STEERING AND CONTROLS - STEERING - STEERING WHEELS
(Select from these Groups)
Click pictures to see enlarged view!
SOFT-GRIP STEERING WHEEL By ATTWOOD CORP
Contemporary style, black, non-magnetic. Fits 3/4" tapered shaft. 13" dia., 3 3/8" dish.
DAYTONA By DETMAR CORP
This classic sport wheel design features a hard grip rim with leather grain appearance. Black with center cap. Center cap accepts round custom logos. •Wheel diameter: 13". Dish: 3-1/8".
VIPER By DETMAR CORP
The highly styled Viper wheel series provides a distinctive, clean appearance from front and rear viewing angles. Soft grip rim feature a leather grain, stitching and finger grips. •Wheel diameter: 13-1/2 Dish: 4"
VIPER EQ By DETMAR CORP
The Viper EQ wheel provides another distinctive equidistant three spoke design. Available with soft grip rims which are leather grained, with stitching and finger grips. •Wheel diameter: 13-1/4" Dish: 4"
CHAMPION STEERING WHEEL By TELEFLEX INC
This 3-spoke hard PVC steering wheel has a 13 1/2" wheel size. Black.
ANTIGUA STEERING WHEELS By UFLEX USA
Meets the EEC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 – EN29775 and ABYC P22 safety standards. •Thermoplastic anti-shock material. •Soft grip •Standard 3/4" taper •Complete with hub
NON MAGNETIC STAINLESS STEEL WHEELS By UFLEX USA
Constructed of high grade stainless steel, these wheels have a cast and welded hub and welded spokes at the rim. •Standard 3/4" taper •Complete with hub •Meet with the EN28848 and ABYC P22 standards.
THERMOPLASTIC ANTI-SHOCK STEERING WHEELS By UFLEX USA
All Ultraflex steering wheels meet the ECC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN28848 - EN29775 and ABYC P22 safety standards. They have standard 3/4" taper. Complete with hub.

STEERING AND CONTROLS - STEERING - HYDRAULIC STEERING
(Select from these Groups)
Click pictures to see enlarged view!
BAY STAR STEERING KIT By TELEFLEX INC
BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your 140HP outboard powered boats. Combine this with the superior Teleflex design team, rigid ISO quality control and teamed with the finest materials and precision manufacturing - BayStar continues the tradition bringing comfort and safety to boating. All warranties will be void if any or all components are misapplied. BayStar hydraulic steering is rated for 140HP (total). KIT INCLUDES: •BayStar Helm Pump (HH4016) •BayStar Cylinder (HC4645) •BayStar Tubing Kit (HT4425) •2 Bottles of hydraulic steering fluid (HA5430) •Filler Kit (5438)
SEA STAR By TELEFLEX INC
The most popular outboard hydraulic steering system offering smooth, super-efficient No FeedBack Steering designed for today's high performance outboards up to 600 HIP. combined. It's the #1 system available today for center console, cruisers and more and more the choice of leading OEMs. FEATURES: Patented No Feedback Steering lock valves. Low friction hydraulic steering system. 4.75 turns from lock-to-lock. Compact helm has only a 4-7/16" footprint - requires only a 3" dash hole (tilt requires larger hole). Factory swaged hoses are Kevlar® reinforced. Packaged complete with helm, cylinder, fittings, oil, bleeder kit, and detailed instructions. Fast, easy installation. Meets A.B.Y.C. standards. Meets N.M.M.A. certification requirements.
SEA STAR PRO By TELEFLEX INC
The ultimate No FeedBack Steering system, designed for the high speed and performance of today's top-end bass boats. Recommended for single outboard configurations up to 300 HIP. with options like jack plates and performance props. This is the steering system of the prestigious BASS Masters Classic® since 1994 and choice of high performance outboard boat builders who need the ultimate in steering. FEATURES: Patented No Feedback Steering lock valves. Low friction hydraulic steering system. 4.0 turns from lock-to-lock. Compact helm has only a 4-7/16" footprint - requires only a 3" dash hole (tilt requires larger hole). Factory swaged hoses are Kevlar® reinforced. Packaged complete with helm, cylinder, fittings, oil, bleeder kit, and detailed instructions. Fast easy installation. Meets A.B.Y.C. standards. Meets N.M.M.A. certification requirements.
SEA STAR TILT STEERING KIT (CLASSIC) By TELEFLEX INC
For use with single engines up to 350HP. The kit contains the following: •(1) HH6541 SeaStar Tilt Helm, Classic, 1.7 •(1) HC5345 SeaStar Pivot Cylinder •(2) HA5430 Hydraulic Oil (1 Liter)
SEA STAR® P/A POWER ASSIST STEERING SYSTEM By TELEFLEX INC
This is the perfect upgrade for your outboard, stern drive or inboard powered boat that is already equipped with hydraulic steering. SeaStar P/A easily ties into the existing Sea Star hydraulic steering system. •Dramatically increases steering comfort by reducing effort at the steering wheel. •Easily-installed upgrade to existing SeaStar Pro manual system •Number of turns lock to lock remains the same as existing manual hydraulic system. •Compatible with SeaStar Power Purge systems. •Compatible with autopilots •Rugged, reliable and compact •Wiring harness included •Ignition protected (SAEJ-1171) •ABYC, CE, NMMA, ISO 10592 Approved
KIT OB HOSE KIT By UFLEX USA
For single station installation. Kit consists of a pair of high pressure flexible hoses supplied with preassembled fittings on both ends.
PROTECH OUTBOARD HYDRAULIC STEERING SYSTEM By UFLEX USA
Protech package kit contains a UP28F Front mount helm pump, UC128-OBF Front mount outboard cylinder (2 versions available, depending on application), and 2 quarts OIL 15 Hydraulic oil. The steering wheel is not included. Uses the optional KIT OB Hose kit with preassembled fittings.



.
Copyright . HERITAGE MARINE INC.
All rights Reserved
Web Hosting Companies