   |
ATWOOD POWER JACKS By ATWOOD MOBILE WEST UNION
Atwood Power Jacks make positioning a trailer
hassle-free. The patented design and convenient of push button operation
take the physical exertion out of cranking a trailer up or down. Simply
push the button to quickly and effortlessly raise or lower the trailer
into position with complete control. Designed for years of convenient,
trouble-free use! |
|
|
 |
LIGHT WEIGHT POWER JACK By ATWOOD MOBILE WEST UNION
The Atwood Low Cost Power Jack offers 1,500 lbs. of
lifting capacity, not just supporting capacity. The economical, patented
design provides hassle-free trailer positioning and includes a manual
override. Fits 2" couplers. |
|
|
|
|
|
|
  |
SWING-UP TRAILER JACKS By BOATERS SPORTS, INC
Boater Sports Trailer Jacks are built tough for
maximum performance and durability. EDC Silver coating provides supreme
corrosion resistance against all elements. The power handle provides
excellent grip and stays smooth turning using the built-in grease
fitting. Hardened steel gears are squared to prevent stripping. Easily
swing to up or down position with double pin locking mechanism. Mag
wheel for easy mobility. |
|
|
  |
BULLDOG® A-FRAME RV JACK WITH POWERED DRIVE By CEQUENT PERFORMANCE
•Positions quickly with a drop of a leg and full
17"of travel •Makes setting up camp easier with a handy built-in level
right where you need it most •Deploys and hooks up more easily at night
with onboard LED courtesy light •Works in case of power loss with
emergency manual override capability easily accessible from the top
•Conserves battery power •Lasts for years with industry-leading Bulldog
performance known worldwide for unmatched strength, durability, and side
load capacity •Retains like-new appearance with corrosion-resistant
surfaces •Protects your investment with a leading 5-year warranty
•Single page color brochure available |
|
|
  |
PIVOTING STAND WITH FOOT By DUTTON-LAINSON CO
Pivoting type stand offers an inexpensive support for
lightweight trailers or trailers in long-term storage. Features
spring-loaded locking mechanism and non-corrosive zinc plated TUFFPLATE®
finish. Fits square tongues up to 3" x 5" or can be adapted for round
tongue mounting. All necessary mounting hardware included. Packed one
per carton. |
|
|
 |
PIVOTING TONGUE JACKS By DUTTON-LAINSON CO
These smooth operating, heavy-duty tongue jacks can
be mounted in a variety of ways on various sizes of trailer tongues. D-L
tongue jacks reduce the physical effort required to maneuver a loaded
trailer into hitching position or removing the trailer from your
vehicle. All models are made from heavy gauge steel for strength and
durability. •Totally enclosed outer tube retards sand and dirt from
coming in contact with miter gears and heavy duty Acme screw. •All
necessary mounting hardware included. Fits square tongue up to 3" x 5".
Can be adapted for round tongue mounting. •Floating miter gears allow
for proper clearance resulting in easier operation. •The model 6800
features extra lift for high mounted bumper applications. •All bright
zinc plated TUFFPLATE® finish for longer life. •The 2-1/2" diameter
mounting hole in swivel bracket fits most other brands of mounting
hardware. •Maximum maneuverability from offset swivel caster assembly.
•Made in U.S.A. •3 yr. Warranty. |
|
|
|
|
|
|
  |
F2 TRAILER TONGUE JACK By CEQUENT / WESBAR-FULTON
•Features precision extruded aluminum alloy inner and
outer tubes, combined with twin alignment bushings to ensure a
precision alignment. •The anodized finish will keep the tubes virtually
corrosion free. •The revolutionary adjustable mount and swivel system is
engineered to be the strongest swivel mechanism in the industry and has
the first mounting system that can be adjusted to any desired height.
•An integrated pull pin with ergonomic grip makes it easy to swivel into
position for lifting or transport. •Has smooth wheel performance.
•5-1/2" wide wheel base adds superior stability. •Includes integrated
handle hold up. •Lifetime limited warranty. |
|
|
 |
FIXED MOUNT DROP LEG JACKS By CEQUENT / WESBAR-FULTON
Designed for use with marine and utility trailers.
Fulton jacks are time-tested and application proven. Stable formed
heavy-gauge steel construction with zinc plating. Will fit up to a 3" x
5" trailer tongue. Sidewind handle style. |
|
|
|
|
 |
XP10 BOLT-THOUGH SWIVEL JACK By CEQUENT / WESBAR-FULTON
The 1000 lb. capacity XP10 offers the industry's
strongest bolt-thru swivel mount system. This new mounting system
eliminates the snap ring and produces less deflection under load and
during operation than other bolt thru designs. The jack swings up and
out of the way in seconds. They stylized 6" caster allows for easy
castering on all surfaces. Zinc plated for corrosion resistance.
Provides 10" of screw travel and up to 25" of total lift. All mounting
hardware included. Fits up to 3" x 5" trailer tongues. Boxed |
|
|
 |
XP15 BOLT-THOUGH SWIVEL JACK By CEQUENT / WESBAR-FULTON
The industry's highest capacity swivel mount caster
jack. The XP15 has a 1500 pound capacity, a corrosion resistant zinc
plated finish and also provides 10" of screw travel and up to 25" of
lift. The XP15 offers the industry's strongest bolt-thru swivel mount
system. This new mounting system eliminates the snap ring and produces
less deflection under load and during operation than other bolt thru
designs. It has the Fulton patented expanded head tube design which
allows for a larger, heavy duty gear set. The 8" rally wheel caster and
heavy duty yoke allow for easy castering under load. Mounting hardware
fits up to 3" x 5" trailer tongues. Boxed. |
|
|
|
|
|
|
  |
RAM SWIVEL TONGUE JACKS By PACIFIC RIM INT'L, LLC
These jacks are ideal for marine and utility trailer
applications. All swivel jacks come standard with heavy duty 1/2" pull
pin. Jacks are protected with 100hr salt spray clear zinc finish.
Bolt-on models fit up to a 3" x 5" trailer frame.•Travel: 10"•Bracket
Height: 12.7"•Retracted Height: 23.25" |
|
|
|
|
|
|
  |
QUICK CHANGE TRAILER JACK By SPRINGFIELD MARINE
Works on all surfaces and most trailer axles (round
or square) from 10"-15" wheels. To use, place the jack under the axle
and drive forward or reverse a few inches. Quick-Change automatically
raises the trailer to the proper height for changing tires, lubing wheel
bearings, etc. High strength aluminum construction, two-ton capacity. |
|
|
  |
POWERJACK-ELECTRIC TRAILER JACK By TRAC
•Raise or lower the trailer tongue with the press of a
button. •Installs in place of your manual jack. •Power wires to connect
to ground and any 12v power source. •Manual Crank Arm is stowed on
housing in case power is not available. •Corrosion resistant "Dacromat
Sea-Coat" on metal jack. •UV resistant rugged ABS housing. •Waterproof
switch |
|
|
