   |
90° FUEL TANK VENT By ATTWOOD CORP
Prevents ingestion of water into fuel tank under
normal sea conditions and washdown. Eliminates the need for an
anti-siphon loop in the vent hose. Designed for permanently installed
fuel tanks. Made of Flame-retardant plastic. Requires 1-1/2" height
above hole center for the anti-siphon feature. Fits hull 1/16" to 5/8"
thick. Meets ABYC H-24 ventilation specifications. |
|
|
|
|
 |
FUEL VENT LINE SURGE PROTECTOR By ATTWOOD CORP
•Allows fuel venting without spillage. •Simply
installs in-line with traditional tank vent systems that use standard
5/8" ID vent hose. •Helps prevent accidental overboard fuel spills
caused by tank sloshing while underway, and helps prevent refueling
spills - the surge-free line causes automatic fuel nozzles to shut off
as the tank refills •Meets ABYC Standard H-24 •Dimensions: 4-11/16" x
1-7/16" wide |
|
|
|
|
 |
STRAIGHT GAS VENT By ATTWOOD CORP
Constructed of fuel-resistant polypropylene, totally
corrosion resistant. Stainless steel fine meshed filter screen, easily
cleaned. Meets ABYC Ventilation specifications. For use with 9/16" I.D.
hose, 7/8" installation hole diameter. |
|
|
|
|
|
|
  |
1247 DECK PLATE KEY By PERKO
Chrome plated plastic. Compact size with hole for key
chain. Will fit Perko 1 1/4" and 1 1/2" deck plates and many other
"Slot" type opening deck plates. 1 1/8" C. to C. of lugs, 1" spade
length, 1 3/4" overall length. One per display card. |
|
|
 |
1248 DECK PLATE KEY By PERKO
Plain plastic. Has a 1" spade on the handle that
allows it to fit many "Slot" type opening deck plates. For 1-1/4" and
1-1/2" deck plate sizes. 1-1/8" C. to C. of lugs, 3-3/8" overall length.
One per display bag. |
|
|
 |
126 CHROMALEX® CAP By PERKO
Black plastic, complete with gasket. Will fit all Perko CHROMALEX® Fills. Non-locking. One per display card. |
|
|
 |
1269 WASTE DECK PLATE FOR HOSE By PERKO
Chrome plated zinc, black plastic cap. Complete with
1248 Key and O-Ring. Cap has slot between the holes. 1-1/2" hose size,
3-1/2" O.D. flange, 2-1/2" neck length. Uses #8 screws. One per display
card. |
|
|
 |
1270 DECK PLATE FOR HOSE By PERKO
Chrome plated zinc, black plastic cap. Complete with
1248 Key, O-Ring and integral retainer on cap. Cap has a slot between
the holes. Meets requirements of U.S.C.G. Safety Standards, January 31,
1977, for Gasoline Fuel Systems, 33CFR183. 1-1/2" hose size, |
|
|
 |
1313 GAS CHROMALEX® FILL By PERKO
Chrome plated zinc, black plastic flange and cap.
Complete with grounding screw and integral cap retainer/gasket. 1-1/2"
hose size, 3-1/8" overall O.D., 1-7/8" neck length. Uses #6 screws. One
per display card. |
|
|
|
|
 |
1319 COMBINATION GAS FILL & TANK VENT By PERKO
Black plastic integral tank vent with flame arrestor.
Flip top cap. No deck plate key or ground wire required. For fuel hose
1-1/2". For vent hose 5/8". Display package. One piece per card. |
|
|
|
|
|
|
 |
506 GAS TANK VENT By PERKO
Chrome plated zinc with black plastic splash guard
and removable 30 mesh, Monel wire screen flame arrestor. 5/8" hose size,
3/4" maximum hull thickness. One per display card. |
|
|
|
|
 |
561 GAS TANK VENT WITH SWIVEL ELBOW By PERKO
Chrome plated zinc alloy cap with zinc alloy elbow.
Black plastic splash guard. Removable 30 mesh stainless steel wire
screen flame arrestor. Elbow can be rotated to any position. 5/8" hose
size, 1" maximum hull thickness. One per display card. |
|
|
 |
571 GAS TANK VENT WITH SWIVEL ELBOW By PERKO
Black plastic cap with zinc alloy elbow. Removable 30
mesh stainless steel wire screen flame arrestor. Elbow can be rotated
to any position. 5/8" hose size, 3/4" maximum hull thickness. One per
display card. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
VENTED FILLS FOR 1-1/2in HOSE By PERKO
•Chrome plated bronze cap •Black plastic body
•Stainless steel bead chain •Integral tank vent with flame arrestor and
anti surge valve •Deck plate key included •For hose size 1-1/2" &
5/8" vent hose •Length of neck: 2-7/16" •Screw size: #8 |
|
|
|
|
|
|
|
|
  |
UNIVERSAL REPLACEMENT DECK FILL CAP By WHITECAP INDUST INC
Fits most standard 316 S.S. 1-1/2" hose deck fills found in the marketplace. Packaged. |
Fuel Systems - FUEL LINE ACCESSORIES - tanks-portable
(Select from these Groups)
Click pictures to see enlarged view!
 |
6 GALLON GAS SCAN TANK By ATTWOOD CORP
A 6-gallon see-thru plastic gas tank. Fuel level is
completely visible through the tank from any angle at a glance.
Eliminates unreliable fuel gauges. Manufactured from see-thru
high-impact plastic so it is durable, won't rust or corrode. Vented cap
and filtered pick-up tube assembly included. Adapts to any outboard
engine. Meets all regulations and requirements. Dimensions: 21"L x
11-1/2"W x 9-1/2"H. |
|
|
 |
EPA COMPLIANT FUEL TANKS By ATTWOOD CORP
Attwood's fuel tanks were designed around the EPA and
California Air Resources Board regulations. Our EPA COMPLIANT fuel tank
adapts to virtually any outboard engine. Meets or exceeds the
requirements of the following standards; ABYCH25, ASTMF852 •Manufactured
from durable, high impact polyethylene—won't rust or corrode.
•Automatic vacuum valve ensures proper fuel flow to engine •Tethered
audible click cap •Ergonomic handle design makes it easy to carry when
full •Optional gauge •1/4" NPT thread to fit all standard tank fittings
and outboard engine fuel line systems |
|
|
 |
FUEL TANK STRAP SETS By ATTWOOD CORP
1" wide white nylon web strap with zinc-plated carbon
steel snap and quick-release buckle. Includes metal foot-man securing
loops and screws. Skin pack. 48"L for 3-6 gallon tanks. |
|
|
  |
6BOW FUEL TANK By MOELLER MFG CO INC
Moeller's® unique design allows for easy storage in
the bow on inflatable's and dinghies. The 6BOW (620040LP) is a light
weight, durable, and easy-to-carry fuel tank.•Manufactured from
polyethylene with ultraviolet inhibitors. •Meets the NEW EPA/CARB
permeation standards•Meets United States Coast Guard, and ABYC
requirements for portable fuel tanks 12-gallon and under. |
|
|
 |
DURAMAX WITH FLO N' GO By MOELLER MFG CO INC
The Duramax fluid transfer siphon pump and patented
Flo n' Go hand pump (with 10' hose) provides the only pre-filling and
fluid transfer system you'll ever need. With environmentally conscience
features, we've stopped accidental spills and overfilling, providing
safer transfer for you and the ecosystem. So weather your fuel needs
include personal water craft, hunting and camping, backyard power
equipment, or professional landscaping tools, the superb functionality
of the combination Duramax and Flo n' Go will make refueling a snap. |
|
|
|
|
 |
LOW PROFILE ABOVE DECK PLASTIC FUEL TANKS By MOELLER MFG CO INC
The Low profile and seamless one-piece construction
makes these tanks easy-to-carry, easy-to-store. A reserve fuel area is
designed right into the tank by means of a partitioned bottom. When the
gauge registers empty, simply tilt the tank and the reserve fuel supply
becomes available. The 90° fuel gauge withdrawal assembly and fill cap
is recessed for additional protection.•Manufactured from polyethylene
with ultraviolet inhibitors. •Meets the NEW EPA/CARB permeation
standards•Meets United States Coast Guard, and ABYC requirements for
portable fuel tanks 12-gallon and under. |
|
|
|
|
 |
MOELLER GAS WALKER By MOELLER MFG CO INC
•3.5 gallons per minute (average flow rate) •Gravity
fed (optional rotary pump available) •Maneuvers easily with recessed
wheels and built-in handle •Meets U.S. requirements for transporting
gasoline •Durable cross-linked polyethylene construction •Brass shut-off
valve controls flow and prevents accidental discharge •UV inhibitors |
|
|
|
MOELLER GAS WALKER By MOELLER MFG CO INC
•3.5 gallons per minute (average flow rate) •Gravity
fed (optional rotary pump available) •Maneuvers easily with recessed
wheels and built-in handle •Meets U.S. requirements for transporting
gasoline •Durable cross-linked polyethylene construction •Brass shut-off
valve controls flow and prevents accidental discharge •UV inhibitors
•10' Hose |
|
|
 |
MOELLER PORTABLE FUEL TANKS By MOELLER MFG CO INC
Blow Molded Portable Fuel Tanks come complete with
built in mechanical fluorescent gauge, withdrawal tube and elbow, and
special vented cap. All tanks have built in reserve area and all meet or
exceed BIA/ABYC standards. |
|
|
 |
ULTRA 3 FUEL TANK WITH EPA CAP By MOELLER MFG CO INC
EASY TO CARRY SIZE! This 3-gallon portable fuel tank
features a reserve fuel area designed into the tank by means of a
partitioned bottom. When the gauge registers empty, simply tilt the tank
and the reserve fuel supply becomes available. The large 3/8" I.D.
withdrawal allows for maximum engine performance. 90° withdrawal means
kink free installation of a fuel line hose. A large easy to read direct
sight gauge is welded onto the tank. • EPA Cap • Contsructed from
seamless polyethylene. |
|
|
|
|
  |
3 GALLON NEPTUNE FUEL TANK By MOELLER MFG CO INC
3 Gallon Topside Tank 17.00"L x 10.50"W x 8.00"H
•Non-corrosive "Neptune" tanks are tough and lightweight with baffled,
manually vented closure caps and a universal 1/4" NPT fuel pick-up
adapter. •Meets ABYC standards. •ISO and CSA certified. |
|
|
 |
3 GALLON NEPTUNE FUEL TANK WITH EPA CAP By MOELLER MFG CO INC
3 Gallon Topside Tank•Non-corrosive "Neptune" tanks
are tough and lightweight with baffled, manually vented closure caps and
a universal 1/4" NPT fuel pick-up adapter.•Meets ABYC standards.•ISO
and CSA certified.•Meets the NEW EPA/CARB permeation standards |
|
|
 |
3.2 GAL O.E. STYLE FUEL TANK WITH EPA CAP By MOELLER MFG CO INC
3.2 Gallon Topside Tank•The OEM's CHOICE in
lightweight, non-corroding portable fuel tanks.•Includes a universal
1/4" NPT fuel pick-up adapter.•Fulfills all your large or small outboard
engine needs.•Approved for use in Japan, Australia and New Zealand.•ISO
and CSA certified•UL Listed•Meets the NEW EPA/CARB permeation standards |
|
|
 |
6 GALLON NEPTUNE FUEL TANK WITH EPA CAP By MOELLER MFG CO INC
6 Gallon Topside Tank•Non-corrosive "Neptune" tanks
are tough and lightweight with baffled, manually vented closure caps and
a universal 1/4" NPT fuel pick-up adapter.•Meets ABYC standards.•ISO
and CSA certified.•Meets the NEW EPA/CARB permeation standards |
|
|
 |
6.6 GAL O.E. STYLE FUEL TANK By MOELLER MFG CO INC
6.6 Gallon Topside Tank 21.50"L x 14"W x 10.00"H •The
OEM's CHOICE in lightweight, non-corroding portable fuel tanks.
•Includes a universal 1/4" NPT fuel pick-up adapter. •Fulfills all your
large or small outboard engine needs. •Approved for use in Japan,
Australia and New Zealand. •ISO and CSA certified •UL Listed |
|
|
 |
6.6 GAL O.E. STYLE FUEL TANK WITH EPA CAP By MOELLER MFG CO INC
6.6 Gallon Topside Tank •The OEM's CHOICE in
lightweight, non-corroding portable fuel tanks.•Includes a universal
1/4" NPT fuel pick-up adapter.•Fulfills all your large or small outboard
engine needs. •Approved for use in Japan, Australia and New
Zealand.•ISO and CSA certified•UL Listed•Meets the NEW EPA/CARB
permeation standards |
|
|
|
TOPSIDE FUEL TANK By MOELLER MFG CO INC
•Provides positive seal with Moeller-exclusive
injection molded 2-1/4" (57.2mm) fill neck. •Mechanically vented fuel
cap ensures easy gripping with exclusive ribbed design that floats.
•Features 90°, 1/4 NPT fuel withdrawal elbow that rotates 306°
eliminating a kinked fuel line (The fuel withdraw on 008199, 008190,
& 008191 do not rotate 360°). •Includes mechanical direct-sight
gauge with easy-to-read indicator. •Manufactured from high-density
polyethylene with UV-stabilized resin. •Tested to industry standard's.
•Specifically designed for use in Boston Whalers®, Carolina Skiff® and
West Key® bench style, center console, pontoon, deck and jon boat
designs. |
|
|
el Systems - FUEL LINE ACCESSORIES - tanks-built in
(Select from these Groups)
Click pictures to see enlarged view!
|
|
|
|
 |
PLASTIC FUEL TANKS By MOELLER MFG CO INC
Moeller plastic fuel tanks are for permanent
installation and are rotationally cast using cross linked HDPE, the most
dependable material for high quality plastic marine fuel tanks. All
plastic tanks are seamless to eliminate possible leaks and are
guaranteed to never rust, corrode, or need painting. The unique recessed
1-1/2" O.D. fill tube makes for easy hose installation, even below
deck, where space is usually restricted. Tanks come complete with
electric sender, fill, vent and fuel withdrawal assembly including 90°
elbow, tube and filter screen. Bracket pockets are molded in for easy
installation using Moeller tank hold down brackets. |
|
|
 |
SWINGARM ELECTRIC SENDING UNITS By MOELLER MFG CO INC
•Internal measurement components will not rust or
corrode! •All electrical senders and dash-mounted gauge are calibrated
to 33 to 240 Ohm's – an industry standard. •100% inspected during
manufacturing to ensure the highest quality. •Swingarm float rotates
easily in 90° increments for tank wall or baffle clearance! •Comes
complete with 5 hole gasket and mounting screws. |
|
|
|
|
Fuel Systems - FUEL LINE ACCESSORIES - fuel line assemblies
(Select from these Groups)
Click pictures to see enlarged view!
  |
THE UPPER RED CAP By MIDWEST HUNT AND FISH
No more getting out of bed in the middle of the night
to go fill up your generator in the dark! "The Upper Red Cap" fuel
supply is designed and tested to run up to 84+ hours; depending on the
size of the gas can, without having to fill your generator up with gas.
•Extend the power out-put of your generator up to 84+ hours. •Saves gas
and money by not spilling gas when filling up your generator. •No need
to elevate the system above the generator, using this vacuum drawing
system. |
|
|
|
|
 |
MOELLER FUEL LINE ASSEMBLIES By MOELLER MFG CO INC
•Assemblies use a compounded, tough and pliable
UV-resistant hose designed to meet the needs of today's gasoline.
•Promotes maximum fuel flow! •Includes fittings built to strict OEM
specifications for replacement parts. •Uses o-ring construction on all
fittings for tight, leak-free connections. •Clamshell packaging is
consumer accepted with self-selling graphics! |
|
|
 |
MOELLER LOW PERM FUEL LINE ASSEMBLIES By MOELLER MFG CO INC
•Assemblies use a compounded, tough and pliable
UV-resistant hose designed to meet the needs of today's
gasoline.•Promotes maximum fuel flow!•Includes fittings built to strict
OEM specifications for replacement parts.•Uses o-ring construction on
all fittings for tight, leak-free connections.•Low Perm
Certified•Clamshell packaging is consumer accepted with self-selling
graphics! |
|
|
|
|
|
|
