HERITAGE MARINE  

Since 1986 

410 Mc Donough St. Joliet, IL. 60436 888.726.4406

WWW.SHOP. HERITAGE MARINE INC. COM 

FOR MORE THEN 50,000 ITEMS AND ENGINE PARTS.


ON LINE Boating Store


Good Old Time Service is still available at Heritage Marine. Just give us a call and we will take care of your SERVICE NEEDS.  

Our Goal is to GET YOU BACK ON THE WATER....
 

Our Mission is to exceed your expectations through excellence in our service and our products.

    CALL 
888-726-4406 

Main Navigation

Bilge Pumps & Blowers

Pumps And Ventilation
(Select from these Subcategories)
BILGE AND AERATOR PUMPS
aerator pumps
bilge pumps
bilge/aerator accessories
LIVEWELL ACCESSORIES
livewell bags
VENTILATION
bilge blowers
blower accessories


Pumps And Ventilation - BILGE AND AERATOR PUMPS - aerator pumps
(Select from these Groups)
Click pictures to see enlarged view!
TSUNAMI CARTRIDGE AERATOR PUMPS By ATTWOOD CORP
Cooler-running motors, premium materials, watertight seals and waterproof wiring...together they ensure a longer life for Tsunami pumps. The aerator pump is available with a 3-1/2" long inlet for fiberglass hulls a 1-1/2" long inlet for aluminum boats of pumps used for live-well recirculation. Comes with a 90 ° 3/4" barbed exhaust port which is 360° rotational for various installation requirements.
TSUNAMI CARTRIDGE MOTOR REPLACEMENT By ATTWOOD CORP
Replacement cartridge motors for Tsunami bilge pumps and aerator pumps. 3/4" I.D. hose size. Rated for 12 volts, with 36" wire .Blister card packaging.
BASSPIRATOR II CARTRIDGE AERATOR PUMP By JOHNSON PUMP OF AMER
Quickly change pump capacity, or make a quick replacement. Has water cooled motor housing. Pump comes with a new Dura-port threaded exhaust port fitting. Both a straight and a 90° 3/4" barbed fitting which are 360° rotational are included for all your various installation requirements.
BASSPIRATOR SYSTEM By JOHNSON PUMP OF AMER
The Basspirator system has everything needed to complete a tournament class installation: #24502 500 GPH pump; 7' of 3/4" I.D. hose; 16' of black/brown wire; Valved aerating head; Two 1-1/2" overflow fittings & hose; Illuminated and fused dash switch; Hose clamps; Complete illustrated instructions.
ICE CHEST AERATOR By JOHNSON PUMP OF AMER
Convert any good-sized ice chest into your own live well and keep bait or your catch in vastly improved condition. Includes all the basics...a sturdy 12-volt pump, hose, a spray bar, press-on clamp and instructions. Since there are no holes to drill the chest can always be used for its original purpose.
A SERIES By THE RULE GROUP
For Thru-Hull Applications. Angled 4" Pickup Tube. Computerized anti-airlock aerator pump. Airlocks are detected and cleared automatically as the pump shuts down and restarts.
STC SERIES PRO-SERIES™ REMOVABLE MOTOR CARTRIDGE By THE RULE GROUP
These innovative pumps include many exciting features including a one hand "push button" motor cartridge removal system, a rotatable base that allows you to position the discharge nozzle at any location, and threaded nylon hose barb attachments, which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing, and positive snap motor cartridge locking mechanism. •Rotatable base for positioning discharge hose •One hand "push button" motor release mechanism •Positive Snap motor cartridge locking mechanism •Anti-airlock feature •Long-life motors •Dual port option for washdown pump •Water-cooled motor •Stainless steel shaft •Rule moisture tight seals •Glass-filled nylon hose adaptors
GENTLE-FLOW™ OXYGENATOR KIT By THE RULE GROUP
Designed with the patented infuser technology and a Gentle-flow™ directional discharge. This is the ideal system for keeping bait and catch alive and healthy. •Removable cartridge motor for quick replacement •Gentle flow reduces harmful turbulence •Aeration/Flow control •Produces millions of microfine bubbles with patented infuser technology •Flexible installations for most custom tanks •Specifications: 3/4" Discharge; 2.8 Amps @ 12V; 5 Amp fuse
PORTABLE AERATOR KIT By THE RULE GROUP
Rule introduces a 12 volt Portable Aerator Kit. Aerates from 5 to 30 gallons of water. The Rule 460 gph pump attaches easily with suction cups to any non-porous surface. 9" long spray tube can be custom cut to fit into any container. A fully adjustable spray head increases or reduces flow of water. Foam filtration system keeps water sparkling clean. The kit also includes battery clips for easy attachment to your 12 volt power source.

Pumps And Ventilation - BILGE AND AERATOR PUMPS - bilge pumps
(Select from these Groups)
Click pictures to see enlarged view!
3-WAY BILGE PUMP SWITCH By ATTWOOD CORP
AUTO/OFF/MANUAL switch for use with automatic pumps or pumps with a float switch. 12VDC, 10A rated. Plate size: 2-13/16" x 1-7/8". Not external ignition proof.
AUTOMATIC FLOAT SWITCH WITH GUARD By ATTWOOD CORP
Converts any bilge pump that draws 10 amps or less to fully automatic operation. The switch features a compact, low-profile design. It can mount on any surface from horizontal up to a 35° angle. The integral cover dampens bilge sloshing to reduce pump cycling and prevents debris interference. The switch mechanism is completely isolated and sealed to resist moisture, fume-ignition, and electrical shock, and contains no harmful mercury or flexing wires. Draws 10 amps or less at 12 volts D.C. 6-32 volts D.C. only. Actuates pump motor at 2" water level. Dimensions: 3" high x 3-1/4" wide x 4-3/4" long.
BILGE PUMP INSTALLATION KIT By ATTWOOD CORP
Installation kit for 3/4" exhaust bilge pumps. Kit includes ON/OFF switch, switch plate, 6' flex hose, thru hull fitting, 2 hose clamps, 20' 3-conductor wire and instructions.
FLOAT SWITCH ONLY By ATTWOOD CORP
HEAVY-DUTY 1700 & 2000 BILGE PUMP By ATTWOOD CORP
Attwood's new bilge pumps provide heavy-duty output and performance for pleasure boats, yachts, as well as commercial vessels. The Attwood pumps are easy to install and maintain, designed to handle abusive conditions, such as sand, shrimp shells, fish scales and other bilge debris. Available in 1700 GPH and 2000 GPH models, both offer the reliable service expected from Attwood products. 12 volt with 36" wire. •Durable, rugged construction operates under abusive on-board conditions. •Powerful pump capacity designed for large boats, yachts and commercial craft. •High capacity output with 1-1/8" outlet. •Heavy-duty motor and pump design assure long life. •Easy to install and maintain. Powerhead removes and secures with convenient "Twist and Lock Tab" feature. •Large filter area prevents clogging from bilge debris. •"Parabolic" pump chamber design for optimal output, life, and heat dissipation. •Corrosion resistant with stainless steel motor shaft. •Meets ABYC Requirements. •1-year warranty. •MADE IN THE USA.
S3 SERIES ELECTRONIC BILGE SWITCH By ATTWOOD CORP
S3 Series electronic switch incorporates a proprietary Solid State electronic Sensing technology to detect bilge water levels and trigger pump activation. Attwood has engineered the S3 Series bilge switch to operate in any bilge water mixture consistently without failure. You can rest ensured that your pump won't be exposed to continuous cycling as the S3 switch won't be fooled by splashing bilge water, chemicals, sludge build up or foam. For added convenience, the S3 bilge switch can be mounted on the floor of the bilge directly to a stringer wall or alongside the basket of the pump without added components or brackets. Attwood has even made the S3 Series switch directly compatible with all competitive products. •5 year warranty •Fully sealed electronics •Free of moving parts that jam, break or wear out over time.
SAHARA AUTOMATIC BILGE PUMPS By ATTWOOD CORP
Sahara Bilge Pumps include 36" lengths for 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal assure powerful, durable performance. All models backed by Attwood's 3-year warranty!
TSUNAMI CARTRIDGE BILGE PUMPS By ATTWOOD CORP
Cooler-running motors, premium materials, watertight seals and waterproof wiring...together, they ensure a longer life for Tsunami pumps. The bilge pump is secured directly to the hull.
TSUNAMI CARTRIDGE MOTOR REPLACEMENT By ATTWOOD CORP
Replacement cartridge motors for Tsunami bilge pumps and aerator pumps. 3/4" I.D. hose size. Rated for 12 volts, with 36" wire .Blister card packaging.
THIRSTY-MATE HAND PUMPS By BECKSON MARINE INC
All plastic, self-priming, self-lubricating, easy cleaning, and will not corrode.
BILGE PUMP PLUMBING KIT By BOATERS SPORTS, INC
Complete the installation of your bilge pump with ease. Includes plastic bilge hose, thru-hull fitting and 2 SS clamps.
BOATER SPORTS BILGE PUMP By BOATERS SPORTS, INC
Bilge pumps have universal mounting base allowing pumps to snap into competitors bases without modification to mounting holes or position. All pumps are ignition protected and meet USCG requirements.
FLOAT SWITCH By BOATERS SPORTS, INC
Automatic ball-type switch - no mercury - with tinned marinegrade wire. For use with most 12V bilge pumps. 15 amp. Simple installation, mounting hardware included.
HAND BILGE PUMP By BOATERS SPORTS, INC
24" hand pump with 36" hose. Perfect for use on small boats, dinghies & lockers or any other place water collects.
AMAZON UNIVERSAL By THE RULE GROUP
For mounting on bulkhead, through bulkhead, on deck or through deck. •Unique safety feature allows operation from both inside and outside the cabin (with optional Through Deck Kit). •Flow rate of up to 25 gpm (100 lpm). •Self-priming up to 10ft (3m). •Push-fit inlet and outlet elbows swivel through 360° to increase flexibility of installation still further. •Corrosion resistant materials throughout. •Quick release clamp ring gives fast access for blockage clearance. •1-1/2" (38mm) ports give excellent solids handling ability for use with holding tanks. •Stainless steel handle supplied with mounting clips and provision for safety lanyard. Fitting: Connections for 1-1/2" (38mm) ID hose. Size: 9-1/2" wide x 9-1/2" high x 6" deep (24cm x 24cm x 15cm). Weight: 2.9 lb (1.2 kg).
CARTRIDGE BILGE PUMP By JOHNSON PUMP OF AMER
Interchangeable cartridge for convenient cleaning or replacement. Discharge water cools motor. Rugged impeller is molded of a glass/resin composite. 3/4" hose size.
FIRST MATE BILGE PUMP By JOHNSON PUMP OF AMER
Designed to Mayfair's exacting standards with many of the same features of more expensive pumps. Manufactured in the U.S.A. 1.5 amp draw, 3/4" hose size, 3-7/8" height. •Output: •410 GPH @ 0' 12VDC •325 GPH @ 3' 12VDC •450 GPH @ 0' 13.6VDC •375 GPH @ 3' 13.6VDC
LOW BOY BILGE PUMP By JOHNSON PUMP OF AMER
Low Profile pump design for ease of mounting and removal in tight bilge areas. Perfect for vessels with bilge pumps mounted beneath inboard or I/O engines. Removable cartridge style. For 750 GPH Low Boy Bilge pumps we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve.
PRO-LINE STYLE BILGE PUMP By JOHNSON PUMP OF AMER
Lower amp draw plus water cooling helps to prevent damaging heat built up. With a super efficient motor employing high energy permanent magnets and improved armature crank out more torque and speed throughout the entire range. Has rugged glass resin composite impellers for long service. Motor connectors are soldered to ensure reliable continuity. Discharge water circulates around the motor to create a water-cooled effect. NNMA, ABYC, Coast Guard and CE certified. 18 month warranty. 3/4" discharge port. 5"L x 3"W x 4"H
ULTIMA BILGE™ PUMP By JOHNSON PUMP OF AMER
UltimaBilge™ Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the patented Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable compact, unit ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage12 V DC. For UltimaBilge™ 600GPH-100GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port. For UltimaBilge™ 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port. •Compact, all-in-one unit •Integrated Ultima Switch sensing right into the pump body •No Mercury •Removable clip on basket design •Removable impeller cover allows for easy clean out •3-wire device can be run in auto or manual override mode •No tools needed for maintenance •Extremely energy efficient •Water-cooled motor for long service intervals •Meets the international standard, ISO 8849 marine
ULTIMA COMBO PUMP By JOHNSON PUMP OF AMER
Pump with automatic operation equipped with the Ultima switch. Voltage12 V DC as well as 24 V DC for 1000 GPH UC and 1250 GPH UC. For 500 GPH UC - 1000 GPH UC, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve.
CARTRIDGE BILGE PUMPS By THE RULE GROUP
Introducing a lineup of Cartridge Bilge Pumps built to the true "Rule" quality standards of long life and superior pumping power. The cartridge series allows the boater to quickly replace a motor while underway. The removable cartridge also allows a thorough cleaning of the impeller area in the event it becomes clogged.
CHARGE N' FLOW PORTABLE AND RECHARGEABLE PUMP KIT By THE RULE GROUP
Charge N' Flow can be used in a variety of applications including: to pump bilge water from tight spaces, as a deck shower, for general wash down, de-watering, for diesel transfer, to pump a clogged sink and even to help around the campsite! It's capable of pumping hot or cold freshwater, seawater, antifreeze and even diesel. Because of its portability, it is also ideal for many household applications. The kit comes complete with a 12 volt 280 GPH pump, eight feet of hose, spray nozzle, enclosed battery, AC battery charger, battery clip adaptor and a vehicle power adapter. It also includes a filter for use in submersible mode or when the filter is removed, the pump can be used in line. The pump is compact, only 5.5 inches tall and 1.5 inches in diameter. It can handle up to 100 gallons of water per charge. When connected to a car battery, it can pump endless amounts of water! •Kit includes: Pump, hose, spray nozzle, carry case with enclosed battery, AC battery Charger, battery clip adapter and vehicle power adapter. •Pumps about 100 gallons per charge! •Suitable for diesel, fresh and salt water and anti-freeze •Quick diesel transfer with no spillage •Water transfer, deck shower, or deck wash •Water Systems to 80 ºC
COMPUTERIZED AUTOMATIC PUMPS By THE RULE GROUP
Automatic pumping without external floats or switches to fail. Heavy duty construction. Completely submersible. Rust and corrosion proof. Water cooled motor-designed for longer life. Snap-off strainer for easy cleaning. Ready for installation. Ignition protected. Double insulated motor. No burn-out when run dry. 3-year warranty.
IN-LINE SUBMERSIBLE PUMPS By THE RULE GROUP
Centrifugal pumping power for water applications. Use for water transfer, general wash-down, bait-well aeration, deck showers and sink draining. Also for easy pump-out in tight bilge areas. •For continuous and intermittent duty. •Strainer removes for hose attachment to inlet nozzle. •Up to 32' of head, up to 14 psi for washdown applications. •IL200K Kit model includes hose, battery clips and adjustable spray nozzle. •Fully submersible heavy duty construction.
PERSONAL WATERCRAFT MANUAL 500 GPH PUMP By THE RULE GROUP
Removes water from the engine compartment. This pump can be activated by an On/Off switch for on-demand use. When water has been removed from the engine compartment, simply turn the pump off. Its compact design (2-3/8" wide, 3-1/2" high) allows it to fit in the tightest of spaces. The pump is of the highest quality and features 6' wire leads for easy installation.
RULE-A-MATIC® FLOAT SWITCH By THE RULE GROUP
Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade "blocked" wire. Designed for pumps drawing up to 14 Amps. Model 35A now includes a 2 year warranty.
RULE-A-MATIC® PLUS™ FLOAT SWITCH By THE RULE GROUP
Sleek rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in test feature. Model 40A now includes a 2 year warranty.
RULE-MATE™ ECO-FRIENDLY BILGE PUMPS By THE RULE GROUP
The NEW eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. When water enters the bilge and reaches a certain height (2-3/4 inches) a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. In the event of an onboard oil spill, straight motor oil that enters the bilge will not turn the pump on. It's part of Rule's continuing commitment to preserving our waterway. The new Rule Mates are available in 500, 750 and 1100 GPH models. Rule has been building bilge pumps for 30-years. The pumps are preferred by yachtsmen and commercial fishermen the world over. •All-in-one pump & switch - No float switch required •Pump turns on when water level rises & shuts off when water is removed •Will not pump oil - Straight motor oil will not turn pump on •Snap-off strainer for easy cleaning •Anti-Fouling impeller •Limited three year warranty
RULE-MATE™ FULLY AUTOMATED BILGE PUMPS By THE RULE GROUP
Rule introduces the rule-mate™ series of bilge pumps. The rule-mate™ consists of a powerful rule bilge pump and a new non-mercury float switch in a single housing. The pumps are available in three capacities-500 GPH, 750 GPH and 1100 GPH. While fully automated, the pump will only turn on when the water level rises. There is no cycling and no battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate™ bilge pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
SUBMERSIBLE PUMPS By THE RULE GROUP
Rule® submersible bilge pumps have set the standard for the industry for many years. They are the first choice of yachtsmen and commercial fishermen throughout the world. More innovations in bilge pump design have come from Rule Industries than any other manufacturer. All pumps include these Rule quality features: •Totally submersible •Compact, efficient, maintenance-free •Silent running, less vibration •Exclusive Rule moisture tight Teflon* seal •Ignition protected •Water cooled motor •No burn-out when run dry •Anti airlock feature •Positive snap-lock strainer base
PIRANHA 357 SERIES BILGE SWITCH By SHURFLO
Bilge Switch Only.
Pumps And Ventilation - BILGE AND AERATOR PUMPS - bilge/aerator accessories
(Select from these Groups)
Click pictures to see enlarged view!
90° THRU-HULL CONNECTOR By ATTWOOD CORP
For 3/4" ID hose, maximum hull thickness: 1".
AERATOR REMOTE MOUNTING BRACKET By ATTWOOD CORP
For mounting the aerator pump to a base, away from the transom. 3/4" bracket. Skin packed.
AERATOR SYSTEM FITTINGS By ATTWOOD CORP
DOUBLE-ENDED THRU-HULL CONNECTOR By ATTWOOD CORP
For 3/4" ID hose, 5" long, maximum hull thickness: 1-1/4".
HOSE CONNECTOR By ATTWOOD CORP
LIVEWELL AERATOR SPRAY HEAD By ATTWOOD CORP
Single valve aerator head for side mounting. Made of durable plastic for corrosion resistance. Integral 90° fitting allows for compact and fast installation. Features rotating knob with O-ring to adjust and maintain flow setting. Knob can be removed for cleaning debris from spray head. For 3/4" I.D. hose for livewell systems with built-in overflow or recirculating systems. Skin packed.
THRU-HULL CONNECTORS By ATTWOOD CORP
Molded of tough reinforced plastic. Will not rust, corrode, discolor or, because they are non-metallic, contribute to electrolysis. Special design eliminates hull streaking, also allows counter-sinking wherever a flush fit is required.
TSUNAMI RECIRQ AERATOR KIT By ATTWOOD CORP
The Tsunami Recirq Kit recirculates livewell water to keep it cooler and rich in oxygen. This self-contained system feeds a separate aerator spray head and works even while you are underway and cannot use a thru-hull connection. Add this kit to any tank that already has freshwater fill system. Or use as a backup pump for a fail-safe system. Recirq Kit Includes: •500 GPH Tsunami aerator pump with short inlet, threaded outlet •4125-1 aerator spray head •4232-1 stainless steel strainer •2 plastic hose clamps •3/4" diameter 23" poly hose •Straight thread-to-barb connector
BOATER SPORTS BILGE PUMP SWITCH By BOATERS SPORTS, INC
3 Way Bilge Pumps Switch with 10 Amp Breaker. On-Off-Auto. Marine grade tin wire and aluminum face plate. Booted toggle switch. 3-1/4" x 2".
DUAL MOUNT LIVEWELL PUMP By BOATERS SPORTS, INC
800 GPH Thru-hull, submersible livewell pump with 3/4" hose outlet. Straight or angled mount. 30" marine-grade tinned lead wires. Salt or freshwater. 12V. Ignition protected
LED SUBMERSIBLE UTILITY/LIVEWELL LIGHT By BOATERS SPORTS, INC
Cool white with clear lens single LED light is totally waterproof and designed to be used above or below water line with through wall mounting. Low amp draw. 1.25" x 1.25".
STRAINER - STAINLESS STEEL By BOATERS SPORTS, INC
Provides coarse filtration and prevent large debris from entering aerator pumps. Designed for use with today's most commonly used aerator pumps. Stainless Steel.
TELESCOPIC BUCKET AERATOR PUMP By BOATERS SPORTS, INC
12V aerator pump designed for use in bait buckets or ice chests. Adjustable spray head, suction cups and battery clips included.
THRU-HULLS By BOATERS SPORTS, INC
High Impact White Nylon Thru-hull fittings. Corrosion proof. For use above the waterline.
THRU-HULL FITTINGS By DETMAR CORP
Durable nylon plastic fittings suitable for exhausting water from bilge pump or other source.
LED BULKHEAD/LIVEWELL RECESS MOUNT LIGHTS By INNOVATIVE LIGHTING INC.
•Operates 9-16 VDC systems •Size 1" OD x 1.25"L •Rated @ 100,000 hours of service life •Requires 11/16" (.687) hole •Shock and vibration proof •Cool to the touch •No corrosion •Rated for underwater use
FLEXIBLE IMPELLER REMOVAL TOOL By THE RULE GROUP
The flexible impeller removal tool is the easiest way to remove impellers, especially when the pump is mounted in tight and cramped conditions. •Size: 6" x 1" x 8" (15 cm wide x 2 cm deep x 20 cm high max) •Weight: 1.1 lb (0.5 kg) •Simple three stage operation easily removes the impeller. •Removes the risk of expensive damage to the pump. •Manufactured from corrosion resistant cast aluminum and stainless steel. •Two models fit all impellers.
JABSCO REPLACEMENT FLEXIBLE IMPELLERS By THE RULE GROUP
•Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. •Jabsco flexible impellers are subjected to rigorous quality process to ensure reliable, efficient and long lasting performance.
9005 SPRAY HEAD ASSEMBLY By JOHNSON PUMP OF AMER
Overall length 13-1/4", 3/4" barb, one shut-off valve with mounting bracket.
AUTOMATIC FLOAT SWITCH AS888 By JOHNSON PUMP OF AMER
For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any Johnson Pump bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32 Volt systems. Use AS888 for a better and safer life afloat!
CLAMP-ON FILTER By JOHNSON PUMP OF AMER
A basic mesh type filter. Easy to install, self cleaning.
ELECTRONIC FLOAT SWITCH By JOHNSON PUMP OF AMER
The electronic Float Switch is built on the same concept as the switch on Cartridge Duo. As a separate accessory it is possible to attach the switch to all pumps in Johnson Pump L Series.
INTAKE FILTER By JOHNSON PUMP OF AMER
Two-piece filter mount to pump fitting, removes clean.
MAYFAIR HAND PUMP By JOHNSON PUMP OF AMER
Comfortable handles and extra-large capacity makes manual pumping less of a chore. Husky valving and large filters help to pass debris and minimize clogs. 25" chamber, with 6 strokes per gallon. With 24" of 1-1/8" hose.
MOTOR CARTRIDGE By JOHNSON PUMP OF AMER
Easy to install and service. Just lift the tab on the housing, twist motor cartridge and pull out to clean debris from the impeller. Upgrading the capacity of your bilge or aerator pump is simple with this convenient motor cartridge. 3 year warranty.
SIDE STRINGER MOUNT BRACKET By JOHNSON PUMP OF AMER
For Cartridge style pumps.
SLOTTED SPRAY HEAD ASSEMBLY By JOHNSON PUMP OF AMER
Overall length 6-3/4", 3/4" thru hull, one shut-off valve.
TRANSOM SHIMS By JOHNSON PUMP OF AMER
Improves gravity feed to pump chamber, connects air lock.
TWO-PIECE SPRAY HEAD ASSEMBLY By JOHNSON PUMP OF AMER
8" spray bar with 3/4" barb, 6" shut-off valve assembly with 3/4" barb and 3/4" thru hull.
ULTIMA SWITCH By JOHNSON PUMP OF AMER
Digital technology uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by water and fluids. Detector cells are totally sealed, are never in contact with the water, will not corrode and are not affected by oil or foreign debris. No moving parts, totally sealed solid state electronics and field detectors, no mercury and no exposed sensors eliminate corrosion possibilities and makes the Ultima switch environmentally sensitive. Ultima activates at a 2" fluid level and deactivates at a 3/4" fluid level. An eight second delay prevents false starts. Ultima switch is rated to handle pumps up to 20 amps at 12 or 24 volts.
322 THRU-HULL CONNECTION By PERKO
Cast bronze. Flange is machined to fit hull and is grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. One per display pack.
328 THRU-HULL CONNECTION By PERKO
Molded white plastic. Broad flange. For use with hose. Note: Thru-hull connections for use with hose are not recommended for use below the waterline. One per display card.
63 PIPE TO HOSE ADAPTER By PERKO
Cast bronze, curved 90°. Note: Meets requirements of U.S.C.G. Safety Standards, January 31, 1977 for Gasoline Fuel Systems, 33CFR183. Sold per each.
65 INTAKE STRAINER By PERKO
Made from cast bronze. Uses #8 screws. One per display card.
AUTOMATIC LIVEWELL TIMER By RIG RITE MFG
Automatically turns livewell pump on and off. Cycle position turns pump on 30 seconds every 3 minutes. Keeps bait or fish alive without draining the battery down. Easily replaces your on-off switch. A must for any livewell.
O.E.M. TIMER MODULE By RIG RITE MFG
Replacement timer module used by many OEM's for many years. Simply plugs into timer switch wiring harness.
VARIABLE LIVEWELL TIMER By RIG RITE MFG
•"On" cycle pumps for 30 seconds •"Off" cycle is variable from 0 to 5-1/2 minutes. •Allows for continuous run for filling livewell •Keeps bait or fish alive without draining battery down •3 wire installation easily replaces your on-off switch •3/8" mounting hole for dashes up to 1" thick •A must for every livewell
HI-WATER BILGE ALARM By THE RULE GROUP
The High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned compartment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires a visual and audible alarm in each unmanned space on commercial vessels at least 26' (7.9m) in length.
MOUNTING BRACKET FOR 360, 500 & 1100 GPH PUMPS By THE RULE GROUP
Permits pumps to be side mounted to a vertical stringer, bulkhead or transom.
STAINLESS STEEL DEBRIS STRAINER By THE RULE GROUP
Extra measure of protection for use on round based Rule® pumps up to 3700 GPH. Strainer filters out excess debris and helps prevent jamming and premature failure.
UNIVERSAL PUMP ADAPTER By THE RULE GROUP
Allows all Rule® 360, 500, 1100 GPH pumps to be mounted to competitive bases: Attwood® V-450, Mayfair Proline 500, 750, 1000 and West Marine 500, 750, and 1000 GPH models.
BILGE PUMP SWITCH By SIERRA SUPPLY CO
Replacement switch for bilge pumps. 3 positions. On for automatic operation, off and momentary on to operate manually.
10 AMP AUTOMATIC AERATOR CONTROL By T-H MARINE
This Automatic Aerator Control provides a source of oxygen-rich water to your live well automatically. This unit features a solid-state timer with adjustable off times to adjust to varying conditions. Easily adaptable to existing systems. Requires a 3" diameter round hole or a 2-1/2" square hole for mounting. Simply connect wiring according to instructions provided. Front panel is 3-1/4 x 3-1/4 and requires only 3" behind panel. This is the only timer on the market that will handle a high capacity pump's current draw. Fully potted to be waterproof. Skin pack.
100% WATERPROOF LIVEWELL OR COMPARTMENT LIGHT By T-H MARINE
Mounts easily. Simple bulb replacement
AERATOR FILTER By T-H MARINE
An externally installed filter for aeration systems. Made of black poly material. This is a simple to install item which prevents aerator system problems due to foreign matter (grass, weeds, and leaves) from clogging pump. Installs with three screws over intake for aerator pump. Skin pack.
AERATOR FILTER DOME By T-H MARINE
This attractive, dome-shaped aerator filter protects pumps from any debris in the water. The fully curved and perforated surface allows more efficient flow than other molded filters. The filter top simply turns and locks tight onto the base that fits underneath the thru-hull flange. The two-piece design allows for easy cleaning and simple installation with no fasteners. Filter mounts onto aerator pump snout or thru-hull fitting. This filter can also be used as a screen for overflow drains. Aerator Filter Dome, fits 3/4" thru-hull or pump. Skin pack.
AERATOR HEAD WITH SHUT-OFF VALVE By T-H MARINE
•AHV-92 White •Hose I.D.: 3/4" •Maximum Wall Thickness: 5/8" •Mounting Hole Diameter: 1-1/16" •Single Nut-Fixed Flange
AERATOR HEAD WITHOUT SHUT-OFF VALVE By T-H MARINE
•AH-92 White •Hose I.D.: 3/4" •Maximum Wall Thickness: 5/8" •Mounting Hole Diameter: 1-1/16" •Single Nut-Fixed Flange
ALL PURPOSE DRAINS/HATCH DRAINS By T-H MARINE
These molded drains available in straight and 90° versions offer a low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage. Skin pack.
BAIT TANK PLUMBING KIT By T-H MARINE
•Complete kit for plumbing fixed or portable tanks •Detailed installation instructions included •Kit contains: 90° Overflow drain tube, 1-1/8" Thru hull drain fitting, Aerator spray head w/shut-off valve, Directional aerator head & Tee fitting to connect both heads to pump
BRITE PLATE™ CHROME PLATED FITTINGS By T-H MARINE
•Look of stainless – price of plastic •Strong plating process strengthens parts •Five step metal bonding process •Won't flake, chip or easily scratch
MINI LED LIVEWELL/COURTESY LIGHT By T-H MARINE
•Totally waterproof •Can mount underwater •Neoprene sealing gasket included •Bright 3-element LED bulb •Bayonet style bulb •5/8" hole size
OVERFLOW DRAIN TUBE By T-H MARINE
This Overflow Drain Tube features a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. This unique drain tube seals much better than any other overflow on the market and removal is much easier. 7/8" O.D. Tube, 12" Long. Fits 1-1/8" x 1-1/4" T-H Thru-Hulls.
REMOTE DRAIN CONTROL By T-H MARINE
Remote system opens or closes livewell drain from the driver's seat, eliminating the problem of plugging and unplugging the drain while fishing. Valve fits 3/4" tubing, the control cable is stainless steel slide wire in a plastic outer jacket, 8-1/2" long. To operate, simply rotate the control to either open or closed position. Cable hook-up is parallel to hose/in-line valve.
THRU-HULL FITTINGS - NINETY DEGREE By T-H MARINE
Features a unique finished head and a pass-around nut for easier and more attractive installation.
THRU-HULL FITTINGS - STRAIGHT By T-H MARINE
All T-H Marine Thru-Hull Fittings are made of the highest quality virgin material to insure consistent size, extra durability and attractive appearance. All materials are UV stabilized to provide longevity. T-H Marine has worked with major hose manufacturers to guarantee that our hose barbs have the exact specifications to fit hose securely so that your installations will be trouble free.
WIRE MESH STRAINER By T-H MARINE
3/4" FPT, screws onto threaded portion of pump on transom side.
WATER WITCH® 101 BILGE SWITCH By WATER WITCH
Introducing the Model 101 Electronic bilge switch, the newest addition to the Water Witch bilge sensors. The Model 101 offers an affordable, more reliable alternative to the ordinary mechanical float switch, not to mention the fact that installation of the 101 is a nearly effortless task. So get rid of that old, unreliable float switch and go with a switch you can trust, a product backed by 20 years of experience in the marine industry.
WATER WITCH® 10-12 HIGH WATER SWITCH By WATER WITCH
Introducing the Model 10-12 electronic high water switch from Water Witch. The small and versatile replacement for the commonly used float switch. With all of the benefits of its predecessors, the 10-12 offers one of the easiest installations possible with its new tab design. Temperature, humidity, or electrical noise will not effect this switch, nor will this switch interfere with other electronics. Being a high water switch, this switch has different delay times than the other Water Witch bilge switches: It turns on after 4 seconds and turns off instantaneously.
WATER WITCH® 230 SUBMERSIBLE BILGE PUMP SWITCH By WATER WITCH
The Water Witch ® 230 submersible electronic bilge pump switch allows boat owners to forever rid themselves of the archaic outdated float switch. Instead of an unreliable and short-lived mechanical float switch, the 230 has no moving parts and requires no adjustments. This eliminates the chance of your battery dying or your pump burning out because of a jammed-on float switch. Temperature, humidity or electrical noise will not effect this switch, nor will it interfere with other electronics. This switch comes with an unprecedented 7 year limed warranty and is in use by both the Canadian and U.S. Coast Guards. If it's good enough for Pumps And Ventilation - LIVEWELL ACCESSORIES - livewell bags
(Select from these Groups)
Click pictures to see enlarged view!
LIVEWELL FISH CADDYS By MY FISH CADDY
You no longer have to catch your fish twice. This heavy duty, water repellent mesh bag fits inside your livewell. Choose the "My Fish Caddy" that most closely fits your size livewell. If we do not have a bag the exact size of your livewell, choose one that is a bit smaller. Keep in mind that the bag only needs to be big enough to carry your catch and provide ample room for the fish while in the live well. The adhesive Velcro will help keep the bag in place while in the livewell.
umps And Ventilation - VENTILATION - bilge blowers
(Select from these Groups)
Click pictures to see enlarged view!
TURBO 3000 BLOWERS By ATTWOOD CORP
Patented in-line design – provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design includes: •Nickel-plated motor can for corrosion resistance •Stiffening ribs to reduce housing distortion •Motor cap to seal wires and motor for water resistance
TURBO 4000 SERIES II BLOWERS By ATTWOOD CORP
Attwood's new and improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. For added durability, Attwood incorporates an engineered plastic housing that resists deformation during installation and prevents blade to housing interference.
TUNNEL BLOWERS By DETMAR CORP
The tunnel design places the motor in the center of the air flow for cooler operation, which results in lower amperage draw. All models are BIA approved and rated and meet U.S.C.G. Safety Standards. Blower housing of ABS plastic. Special clips on all hose flanges eliminate the need for hose clamps.
FLANGE MOUNT BLOWERS By THE RULE GROUP
Quiet running, low amp draw 12 and 24 Volt DC model blowers. 7.1m3/min (250cfm) output.
FLANGE MOUNT VENTILATOR By THE RULE GROUP
Flange mount model attaches to the wall directly with screws on the blower body flange. 105 CFM capacity. Voltage 12 volts, DC. Current consumption 4.25 amps.
FLEX MOUNT VENTILATOR By THE RULE GROUP
By attaching flexible ducting to either inlet or outlet collars, the flex mount model ventilates remote enclosed areas. Bracket may be rotated to permit mounting the ventilator with the outlet facing any direction. Flexible ducting will fit onto both inlet and outlet collar without adapters. 105 CFM capacity. Voltage 12 volts, DC. Current consumption 4.25 amps.
RULE® IN-LINE BLOWER By THE RULE GROUP
Rule® in-line blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw and quieter operation than standard blower
ps And Ventilation - VENTILATION - blower accessories
(Select from these Groups)
Click pictures to see enlarged view!
FLUSH LOUVERED VENT By ATTWOOD CORP
Canted louvers deflect rain and spray and help conceal the collector box. Installs flush to hull. Drain slots to prevent water accumulation. Black vent is ABS plastic. Install with #8 screws. Requires 1341 collector box for 3" system, or 1342 for 4" system. Packaged with poly bag and header.
PLASTIC LOUVERED VENT By ATTWOOD CORP
Made from ABS plastic, will not rust, corrode, discolor or streak. No sharp edges. Designed for gunwale mounting to assure high vent mounting 3-7/16"W x 17-7/8"L x 7/8"H (1" neck). Installation hole size 2-1/4" x 16-1/8". Predrilled with 6 holes for no. 8 screws. Fits 1345 collector box.
SURFACE MOUNT COWL VENTILATOR By ATTWOOD CORP
Can be used with any standard 3" ventilation hose. Neck extends 1" below deck. 5-7/8"W, 5-1/4"L, 2-1/4"H. Installation hole dia.: 3-1/4". Comes with flexible hose flange attached. Vent is die-cast ZAMAK with chrome finish. Flange is black polypropylene for easy insertion in deck hole.
VENTURI VENT By ATTWOOD CORP
Clean, contemporary, louver design. Corrosion-resistant ABS plastic. For 3" or 4" I.D. ventilation system. Install with #8 screws. Sized for installation even on highly contoured decks. Black, poly bagged. 2-3/4" H x 11/16" W x 17-9/16" L.
CLAM SHELL VENT By BOATERS SPORTS, INC
For easy routing of cables. Stainless Steel Construction.
1312 CHROMALEX® COWL VENTILATOR By PERKO
Chrome plated zinc cowl with black plastic base. 3" duct threads into neck, hose clamps not required. 7 sq. in. mouth opening. 5-3/4" overall length, 4-3/8" overall width, 2-5/8" overall height. Uses #8 screws. One per display card.
315 CLAM SHELL VENTILATOR By PERKO
Chrome plated brass. One per display card. 1-5/8" x 1-1/2" base, 7/16" opening height, 7/8" opening width. Uses #4 screws.
330 LOCKER VENTILATOR By PERKO
Chrome plated brass. Uses #6 R.H. screws. One per display card.
339 CLAM SHELL VENTILATOR By PERKO
Chrome plated brass. 4" x 3-3/4" base, 1-5/8" opening height, 2-1/2" opening width. Uses #6 screws. One per display card.
FLOOR DRAIN/VENT COVERS By T-H MARINE
FD-2 and FD-4 are designed with a flange molded into part to fit into hole so that cut or raw edges are hidden by floor drain for a more efficient, attractive installation. Black. Skin pack. •FD-2 4-1/4" overall diameter. Mounts with 4 screws in a 2-1/2" diameter hole. •FD-4 5-5/8" overall diameter. Mounts with 4 screws in a 4" diameter hole.
MIDGET CLAM SHELL VENT By WHITECAP INDUST INC
Stainless steel.
them,......why not for you?
.
Copyright . HERITAGE MARINE INC.
All rights Reserved
Web Hosting Companies